How do I find out how old my record player is?

2 Comments

1. lare says:

   October 3, 2009 at 9:29 am

   if it has tubes, then the speaker is a 3.2 ohm type.
2. Magyver says:

   October 3, 2009 at 9:29 am

   It’s really not that important, you won’t be able to get the original one anyway.

   Pull the speaker out, look on the back. It should give the ohms. Just buy any full range speaker from a store like Radio Shack that matches the ohms, size, and bolt pattern.

   If the speaker doesn’t give the ohms, assume it is 8, and do the same thing.

   If you can’t match it perfectly, do the best you can, and mount it in there the best you can.

   It will work fine.